AISI 1026 SAE1026 Hot Rolled, Deep Hole Bored, or Cold Drawn Seamless Carbon Steel Honed Steel Tubing for Hydraulic Cylinder Barrel

AISI 1026 SAE1026 Hot Rolled, Deep Hole Bored, or Cold Drawn Seamless Carbon Steel Honed Steel Tubing for Hydraulic Cylinder Barrel

Component I: Product INTRODUCTION
one. Description: 
Honed tubing is a kind of smooth bore steel tube used to manufacture hydraulic cylinder barrels that is the main portion of a piece of hydraulic cylinder. 

two. Commodity: AISI 1026 honed steel tubing for hydraulic cylinder

3. Dimension variety: 40mm*30mm-580mm*500mm

4. Obtainable steel grade: 

SAE/AISI:  SAE1571, SAE1026, SAE1045, SAE4130, SAE4140
DIN:  ST52, ST52.3, ST52.4
EN:  E355, C45E, 25CrMo4, 42CrMo4, CK45, S45C, E410, E470
GB:  twenty#, 45#, 16Mn, Q345B, Q345C, Q345D, Q345E, 25Mn, 27SiMn, 

5. Manufacture strategy: Chilly rolled, hydraulic chilly drawn, very hot rolled+deep gap boring

six. Shipping and delivery condition: 

BK BKW BKS GBK NBK Q+T
+C +LC +SR +A +N
Chilly rolled Chilly drawn Anxiety relieved Annealed Normalized Quenched+Tempered

seven. Bore therapy: Honing, skiving&roller burnishing

eight. Bore roughness management: Ra0.25um max or Ra0, 35um max for honed tubes, Ra0.25um max for skived&roller burnished tubes. 

nine. Stop finish: Basic finishes with sq. cuts, free of burrs for honed tubes. Minor bevelled ends for skived&roller burnished tubes. 

10. CZPT export packing: In bundles tied with metal strips. Int&ext oil coating. Finish plastic caps. Exterior packing by PVC baggage and knit luggage. 

eleven. CZPTized packing and marking can be supplied on ask for. 

12. H8 tolerance: 

ID range Tolerance ID selection Tolerance
18< d ≤30 +/+.033 one hundred eighty< d ≤250 +/+.072
thirty< d ≤50 +/+.039 250< d ≤300 +/+.081
fifty< d ≤80 +/+.046 three hundred< d ≤315 +/+.081
eighty< d ≤120 +/+.054 315< d ≤400 +/+.089
a hundred and twenty< d ≤180 +/+.063 400< d ≤500 +/+.097

13. Big difference in between honed tube and skived&roller burnished tube: In hydraulic cylinder market, there are 2 solutions for bore treatment: Honing, and skiving&roller burnishing. Honing or skiving&roller burnishing leads to various interior surface area impression, but both make certain good roughness. 

Interior Floor Situation OF HONED TUBES:

Inside Floor Problem OF SKIVED&ROLLER BURNISHED TUBES:

Element II: Frequently Asked Concerns
one. MOQ: 
CZPTly Min Get Quantity can be two-three tons/dimensions for tubes with OD under 250mm, and 10 tons/measurement for tubes with OD above 250mm. Often, it depends on steel quality you require. If you want special grade like E410, E470 or alloy metal tube, MOQ should be 10 tons/measurement at minimum. 
2. Shipping and delivery Time: CZPTly, our shipping and delivery time for honed tubes is all around 40-sixty days relying on the sizes and portions. It will just take us fifteen-thirty days to get uncooked content. For case in point, if you need to have 3 tons of modest size honed tubes 50mm*40mm with roughness of Ra0.25um max, it will consider us at the very least thirty days to hone this size. 
three. Guarantee&Ensure: Guarantee&promise period is 6 months since we supply the tubes, and we are not liable for good quality difficulty triggered by incorrect unloading or storage after shipment. We welcome customer’s inspection prior to shipment. 
4. Payment Technique: We accept payment method like T/T, L/C, or D/P, but it depends on our investigation about clients. We have a solution to assess the credit history of buyers from all over the globe, and time and volume of D/P we can release is established by the analysis. 
five. Good quality Control: ninety% of the tubes are produced from scorching rolled seamless pipes. So, quality of uncooked substance decided quality of completed tubes. We purchase uncooked material from steady suppliers who are foremost steel mills, and we examine the uncooked substance as per the specs. Throughout our generation treatment, there is inspection and good quality management in each and every phase. 

Portion III: Company INTRODUCTION
We are a manufacturer of cold drawn, chilly rolled, and hydraulic cold drawn metal tubes with OD upto 356mm since 2002. Covering an spot of about 32000M2, we have 12 normal workshops with 2 hydraulic cold drawing benches, 4 chain chilly drawing benches, and 2 ERW mills. Our amenities covers all the creation techniques from pickling, chilly drawing, warmth dealing with, observed slicing, straightening, inspection, packing to further machining &turning, cold drawing die fabrication, and tools repairation&routine maintenance. 

Manufacturing facility Appearance:

Raw Material Stock:

HYDRAULIC Cold DRAWING:

STRAIGHTENING:

Observed Reducing:

LATHES:

HONING: 

SKIVING&ROLLER BURNISHING:

 

AISI 1026 SAE1026 Hot Rolled, Deep Hole Bored, or Cold Drawn Seamless Carbon Steel Honed Steel Tubing for Hydraulic Cylinder Barrel

TAGs:

agricultural chain

As one of the agricultural chain manufacturers, suppliers, and exporters of mechanical products, We offer agricultural chain and many other products.

Please get in touch with us for details.

Manufacturer supplier exporter of agricultural chain.

Recent Posts